数字农科院2.0

Calibration and testing of discrete element simulation parameters for spinach seeds

文献类型： 外文期刊

作者： Zheng, Gang;Qi, Bing;Zhang, Wenyi;Song, Shumin;Wu, Yu;Xia, Qian Qian;Wang, Yunxia

作者机构：

关键词： Spinach seeds;Discrete element method;Contact parameters;Calibration;Seed metering device

期刊名称： COMPUTATIONAL PARTICLE MECHANICS

ISSN： 2196-4378

年卷期： 2024 年

页码：

收录情况： SCIE（2024版）

摘要： The accuracy of simulation parameters for spinach sowing process was enhanced by establishing the seed simulation model based on the intrinsic parameters of spinach seeds using the Hertz-Mindlin model. Calibration of simulation parameters between spinach seeds and contact materials (ABS resins and stainless steel) was performed using free-fall collision method, inclined plane sliding method, and inclined plane rolling method. The results indicated: coefficients of restitution, static friction coefficients, and rolling friction coefficients between spinach and ABS resins were 0.310, 0.467 and 0.045, respectively. Coefficients of restitution, static friction coefficients and rolling friction coefficients between spinach and stainless steel were 0.346, 0.505 and 0.047, respectively. Considering inter-seed contact parameters, a study was conducted using the relative error between measured repose angle and simulated repose angle as the indicator. This involved steepest ascent experiment and three-factor five-level rotational combined design experiment with the optimisation goal of minimising relative error. Through optimal analysis of test data, the following results were obtained: coefficients of restitution, static friction coefficients, and rolling friction coefficients between spinach seeds were found to be 0.47, 0.37 and 0.04, respectively. Calibration results were validated through sowing verification experiments, demonstrating that the qualified rate, multiple rate and missing rate of both simulation and actual tests were less than 5.8%, verifying the reliability of the calibration results. The research findings can serve as a theoretical reference for the design and simulation optimisation of spinach sowing devices.

分类号：

  • 相关文献

[1]Engineering Discrete Element Method-Based Design and Optimization of the Key Components of a Spoon-Wheel Spinach Seed-Metering Device. Gang Zheng,Bing Qi,Wenyi Zhang,Weixing Shao,Lei Zhang,Yunxia Wang,Youqiang Ding. 2024

[2]Calibration of Ramie Stalk Contact Parameters Based on the Discrete Element Method. Yao Hu,Wei Xiang,Yiping Duan,Bo Yan,Lan Ma,Jiajie Liu,Jiangnan Lyu. 2023

[3]Research on the Construction of a Finite Element Model and Parameter Calibration for Industrial Hemp Stalks. Jicheng Huang,Kunpeng Tian,Aimin Ji,Bin Zhang,Cheng Shen,Haolu Liu. 2023

[4]Test and Optimization of Oilseed Rape (Brassica napus L.) Threshing Device Based on DEM. Wu, Jun,Tang, Qing,Mu, Senlin,Jiang, Lan,Hu, Zhichao. 2022

[5]A rapid prototyping method for crop models using the discrete element method. Xiaoyu Li,Yuefeng Du,Lei Liu,Enrong Mao,Jun Wu,Yanan Zhang,Dafang Guo. 2022

[6]Development of Impurity-Detection System for Tracked Rice Combine Harvester Based on DEM and Mask R-CNN. Zhuohuai Guan,Haitong Li,Xu Chen,Senlin Mu,Tao Jiang,Min Zhang,Chongyou Wu. 2022

[7]Flexible DEM Model Development and Parameter Calibration for Rape Stem. Guan, Zhuohuai,Mu, Senlin,Li, Haitong,Jiang, Tao,Zhang, Min,Wu, Chongyou. 2022

[8]Simulation Analysis and Experiments for Blade-Soil-Straw Interaction under Deep Ploughing Based on the Discrete Element Method. Zhang J.,Xia M.,Chen W.,Yuan D.,Wu C.,Zhu J.. 2023

[9]Calibration of Parameters for Discrete Element Simulation Model for Alfalfa with Different Moisture Contents Based on Angle of Repose Test. Wang, Haoyi,Wu, Pei,He, Hongkai,Ma, Yanhua,Bu, Ku,Xue, Jing. 2022

[10]Development of Centrifugal Disc Spreader on Tracked Combine Harvester for Rape Undersowing Rice Based on DEM. Guan, Zhuohuai,Mu, Senlin,Jiang, Tao,Li, Haitong,Zhang, Min,Wu, Chongyou,Jin, Mei. 2022

[11]Discrete Element Model Building and Optimization of Tomato Stalks at Harvest. Qimin Gao,Lei Cheng,Renbing Wang,Mingjiang Chen,Weisong Zhao,Jingjing Fu,Zhenwei Wang. 2024

[12]Determination and parameters calibration of the soybean-bonded particle model based on discrete element method. Han, Dan-Dan,Wang, Qing,Wang, Yun-Xia,Li, Wei,Tang, Chao,Lv, Xiao-Rong. 2024

[13]Simulation and Optimization Experiment of Seven-Link Planting Mechanism Based on Discrete Element Method and Multibody Dynamics (DEM–MBD) Coupling. Zhichao Cui,Jingjing Fu,Yundong Wang,Yating Yang,Jingling Song,Kangping Lu,Xingchang Huang,Hongli Liang,Binxing Xu,Weisong Zhao,Yongsheng Chen,Chunsong Guan,Chenghao Zhang. 2025

[14]DEM-Based Parameter Calibration of Soils with Varying Moisture Contents in Southern Xinjiang Peanut Cultivation Zones. Wen Zhou,Hui Guo、张雨、Xiaoxu Gao,Chuntian Yang,Tianlun Wu. 2025

[15]Calibration-induced uncertainty of the EPIC model to estimate climate change impact on global maize yield. Xiong, Wei,Yang, Di,Xiong, Wei,Porter, Cheryl H.,Jones, James W.,Skalsky, Rastislav,Balkovic, Juraj,Skalsky, Rastislav,Balkovic, Juraj. 2016

[16]Calibration of the Angstrom-Prescott coefficients (a, b) under different time scales and their impacts in estimating global solar radiation in the Yellow River basin. Liu, Xiaoying,Mei, Xurong,Li, Yuzhong,Zhang, Yanqing,Wang, Qingsuo,Jensen, Fens Raunso,Porter, John Roy. 2009

[17]A crop model cross calibration for use in regional climate impacts studies. Xiong, Wei,Lin, Erda,Li, Yue,Xiong, Wei,Lin, Erda,Li, Yue,Holman, Ian,Conway, Declan.

[18]Research and Design of Dynamic Belt weighing SCM System Based on the Separating Structure. Wang Su-zhen,Wu Chong-you,Xiao Ti-qiong,Yu Shan-shan. 2010

[19]A Method to Calibrate the Electromagnetic Tracking Instrument When Measuring Branches of Fruit Trees. Wu, Ding-Feng,Wang, Jian,Zhou, Guo-Min,Liu, Li-Bo. 2011

[20]Evaluation of Radiometric Performance for the Thermal Infrared Sensor Onboard Landsat 8. Ren, Huazhong,Du, Chen,Qin, Qiming,Meng, Jinjie,Liu, Rongyuan,Yan, Guangjian,Li, Zhao-Liang,Li, Zhao-Liang. 2014

作者其他论文 更多>>