数字农科院2.0

Investigation of the mechanism of different 3D printing performance of starch and whole flour gels from tuber crops

文献类型： 外文期刊

作者： Shengyang Ji;Qingxin Zeng;Minghao Xu;Ye Li;Tao Xu;Yongheng Zhong;Yuqi Liu;Fengzhong Wang;Baiyi Lu

作者机构：

关键词： 3D printing;Printing precision;Starch and whole flour

期刊名称： International Journal of Biological Macromolecules

ISSN： 0141-8130

年卷期： 2023 年 241 卷

页码：

收录情况： SCIE（2023版）

摘要： This study aims to reveal the variation in 3D printing performance of whole flour and starch gels as derived from different varieties of tuber crops including cassava, potato, and yam, along with its mechanism. The whole flour of the same tuber crops showed a higher branching degree, average molecular weight (R¯h), and the proportion of AM chains for 100 < X ≤ 1000 than its starch. Due to the higher degree of branching, the crystallinity of whole flour reached a higher level. In this circumstance, G2′ of the dispersion system decreased, which facilitated smooth extrusion of ink from the nozzle, thus improving the precision of printing for the final product. Besides, a higher R¯h and the percentage of AM chains for 100 < X ≤ 1000 made it easier for the material to extrude, thus enhancing the printing accuracy of the product. The higher short-range ordered structure of whole flour also enhanced the printing performance of 3D printed products. This research contributes an effective solution to the selection of starch and whole flour for food 3D printing.

分类号：

  • 相关文献

[1]Regulation of rheological properties of soy protein isolate-beeswax based bigel inks for high-precision 3D printing. Runkang Qiu,Guodong Qiu,Peiyao Zhao,Muhammad Awais,Bei Fan,Yatao Huang,Litao Tong,Lili Wang,Liya Liu,Fengzhong Wang. 2024

[2]Application Of Soy Protein Isolate A.nd Hydrocolloids Based Mixtures A s Promising Food Material In 3D Food Printing. Chen, JW, Mu, TH, Goffin, D, Blecker, C, Richard, G, Richel, A, Haubruge, E. 2019

[3]Effect of temperature on rheological, structural, and textural properties of soy protein isolate pastes for 3D food printing. Jingwang Chen,Hongnan Sun,Taihua Mu,Christophe Blecker,Aurore Richel,Gaëtan Richard,Nicolas Jacquet,Eric Haubruge,Dorothée Goffin. 2022

[4]Improvement of 3D printing performance of pea protein isolate Pickering emulsion gels by regulating electrostatic interaction between protein and polysaccharide. Wang, Yifan,Bai, Congjin,Mcclements, David Julian,Xu, Xingfeng,Sun, Qingjie,Jiao, Bo,Wang, Qiang,Dai, Lei. 2023

[5]Research Progress of Food-Grade High Internal Phase Pickering Emulsions and Their Application in 3D Printing. Wu, Chao,Liu, Zhe,Zhi, Lanyi,Jiao, Bo,Tian, Yanjie,Liu, Hongzhi,Hu, Hui,Ma, Xiaojie,Pignitter, Marc,Wang, Qiang,Shi, Aimin. 2022

[6]Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing. Hongxia Wang,Chaoyang Wu,Juncheng Zhu,Yang Cheng,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yu Fu,Hai Chen,Hongjie Dai,Yuhao Zhang. 2023

[7]Effect of twin-screw extrusion pretreatment on starch structure, rheological properties and 3D printing accuracy of whole potato flour and its application in dysphagia diets. Yingsa Wang,Ruixuan Zhao,Wei Liu,Renjie Zhao,Qiannan Liu,Honghai Hu. 2024

[8]Encapsulation of lutein in gelatin type A/B-chitosan systems via tunable chains and bonds from tweens: Thermal stability, rheologic property and food 2D/3D printability. Hongxia Wang,Xianyou Lin,Juncheng Zhu,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yuhao Zhang. 2023

[9]Utilization of polysaccharide-based high internal phase emulsion for nutraceutical encapsulation and 3D printing: Reinforcement of curcumin stability and bioaccessibility. Xueqing Li,Liuping Fan,Jinwei Li. 2023

[10]Effect of oil content and protein particles concentration on non-dairy whip topping based on Pickering emulsion system and their 3D printing properties. Chao Wu,Zhe Liu,Lanyi Zhi,Bo Jiao,Hui Hu,Xiaojie Ma,Jinjin Zhu,Marc Pignitter,Qiang Wang,Aimin Shi. 2023

[11]Correlation between 3D printability and rheological properties of biopolymer fluid: A case study of alginate-based hydrogels. Zhong Q.,Chen Y.,Zhang X.,Yang G.,Jin W.,Peng D.,Huang Q.. 2024

[12]Effects of different hydrocolloids on the 3D printing and thermal stability of chicken paste. Nanqi Zhao,Chaofan Guo,Ziyao Liu,Lin Chen,Yayun Hu,Minyi Han,Feng Huang,Zhuangli Kang,Xianchao Feng. 2024

[13]3D printing of pickering emulsion gels of protein particles prepared by high pressure homogenization and heating. Chao Wu,Zhe Liu,Xue Hei,Shanshan Li,Bo Jiao,Xiaojie Ma,Hui Hu,Jinjin Zhu,Bernard P. Binks,Zhiang Jia,Qingwen Chen,Qiang Wang,Aimin Shi. 2024

[14]Application of proteins in edible inks for 3D food printing: A review. Yifan Wang,David Julian McClements,Congjin Bai,Xingfeng Xu,Qingjie Sun,Bo Jiao,Song Miao,Qiang Wang,Lei Dai. 2024

[15]Development of soy protein isolate-chelator soluble pectin composite gels as extrusion-based 3D food printing inks: Effects of mingling strategy. Xie, Jin,Bi, Jinfeng,Liu, Xiaoxian,Blecker, Christophe,Jacquet, Nicolas,Lyu, Jian. 2025

[16]Research Progress in 3D Printed Biobased and Biodegradable Polyester/Ceramic Composite Materials: Applications and Challenges in Bone Tissue Engineering. Zhu, Shunshun,Sun, Hongnan,Mu, Taihua,Richel, Aurore. 2025

[17]Development of soy protein emulsion gels-based 3D printed dysphagia foods: Effects of the egg white protein supplementation. Zhao, Peiyao,Kou, Delin,Qiu, Runkang,Li, Shugang,Awais, Muhammad,Tong, Litao,Wang, Lili,Fan, Bei,Wang, Fengzhong,Liu, Liya. 2024

[18]Emulsion gel-based inks for 3D printing of foods for dysphagia patients: High internal type emulsion gel-biopolymer systems. Yifan Wang,Rotimi Emmanuel Aluko,David Julian McClements,Yue Yu,Xingfeng Xu,Qingjie Sun,Qiang Wang,Bo Jiao,Lei Dai. 2024

[19]Effect of oil and particles content on microstructure, rheology, and thermosensitive 3D printability of particles -stabilized high internal phase Pickering emulsions. Wu, Chao,Liu, Zhe,Hei, Xue,Li, Shanshan,Jiao, Bo,Ma, Xiaojie,Hu, Hui,McClements, David Julian,Wang, Qiang,Shi, Aimin. 2024

[20]Effect of activator dosage and mass ratio of GGBFS to FA on 3D printing performance of kenaf geopolymer. Xiao Kong,Li Dai,Shicai Chen,Yuan Guo,Zehuan Zhang,Shaojie Wang. 2024

作者其他论文 更多>>