数字农科院2.0

Research Progress in 3D Printed Biobased and Biodegradable Polyester/Ceramic Composite Materials: Applications and Challenges in Bone Tissue Engineering

文献类型： 外文期刊

作者： Zhu, Shunshun;Sun, Hongnan;Mu, Taihua;Richel, Aurore

作者机构：

关键词： polyester;ceramic;3D printing;functionalnanomaterials;bone tissue engineering scaffolds;bone defect regeneration

期刊名称： ACS APPLIED MATERIALS & INTERFACES

ISSN： 1944-8244

年卷期： 2025 年 17 卷 2 期

页码：

收录情况： SCIE（2025版） ; ; EI（2025版）

摘要： Transplantation of bone implants is currently recognized as one of the most effective means of treating bone defects. Biobased and biodegradable polyester composites combine the good mechanical and degradable properties of polyester, thereby providing an alternative for bone implant materials. Bone tissue engineering (BTE) accelerates bone defect repair by simulating the bone microenvironment. Composite scaffolds support bone formation and further accelerate the process of bone repair. The introduction of 3D printing technology enables the preparation of scaffolds to be more precise, reproducible, and flexible, which is a very promising development. This review presents the physical properties of BTE scaffolds and summarizes the strategies adopted by domestic and international scholars to improve the properties of scaffolds based on biobased and biodegradable polyester/ceramic composites in recent years. In addition, future development prospects in the field and the challenges of expanding production in clinical applications are presented.

分类号：

  • 相关文献

[1]Application Of Soy Protein Isolate A.nd Hydrocolloids Based Mixtures A s Promising Food Material In 3D Food Printing. Chen, JW, Mu, TH, Goffin, D, Blecker, C, Richard, G, Richel, A, Haubruge, E. 2019

[2]Effect of temperature on rheological, structural, and textural properties of soy protein isolate pastes for 3D food printing. Jingwang Chen,Hongnan Sun,Taihua Mu,Christophe Blecker,Aurore Richel,Gaëtan Richard,Nicolas Jacquet,Eric Haubruge,Dorothée Goffin. 2022

[3]Improvement of 3D printing performance of pea protein isolate Pickering emulsion gels by regulating electrostatic interaction between protein and polysaccharide. Wang, Yifan,Bai, Congjin,Mcclements, David Julian,Xu, Xingfeng,Sun, Qingjie,Jiao, Bo,Wang, Qiang,Dai, Lei. 2023

[4]Research Progress of Food-Grade High Internal Phase Pickering Emulsions and Their Application in 3D Printing. Wu, Chao,Liu, Zhe,Zhi, Lanyi,Jiao, Bo,Tian, Yanjie,Liu, Hongzhi,Hu, Hui,Ma, Xiaojie,Pignitter, Marc,Wang, Qiang,Shi, Aimin. 2022

[5]Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing. Hongxia Wang,Chaoyang Wu,Juncheng Zhu,Yang Cheng,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yu Fu,Hai Chen,Hongjie Dai,Yuhao Zhang. 2023

[6]Investigation of the mechanism of different 3D printing performance of starch and whole flour gels from tuber crops. Shengyang Ji,Qingxin Zeng,Minghao Xu,Ye Li,Tao Xu,Yongheng Zhong,Yuqi Liu,Fengzhong Wang,Baiyi Lu. 2023

[7]Effect of twin-screw extrusion pretreatment on starch structure, rheological properties and 3D printing accuracy of whole potato flour and its application in dysphagia diets. Yingsa Wang,Ruixuan Zhao,Wei Liu,Renjie Zhao,Qiannan Liu,Honghai Hu. 2024

[8]Encapsulation of lutein in gelatin type A/B-chitosan systems via tunable chains and bonds from tweens: Thermal stability, rheologic property and food 2D/3D printability. Hongxia Wang,Xianyou Lin,Juncheng Zhu,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yuhao Zhang. 2023

[9]Utilization of polysaccharide-based high internal phase emulsion for nutraceutical encapsulation and 3D printing: Reinforcement of curcumin stability and bioaccessibility. Xueqing Li,Liuping Fan,Jinwei Li. 2023

[10]Effect of oil content and protein particles concentration on non-dairy whip topping based on Pickering emulsion system and their 3D printing properties. Chao Wu,Zhe Liu,Lanyi Zhi,Bo Jiao,Hui Hu,Xiaojie Ma,Jinjin Zhu,Marc Pignitter,Qiang Wang,Aimin Shi. 2023

[11]Correlation between 3D printability and rheological properties of biopolymer fluid: A case study of alginate-based hydrogels. Zhong Q.,Chen Y.,Zhang X.,Yang G.,Jin W.,Peng D.,Huang Q.. 2024

[12]Effects of different hydrocolloids on the 3D printing and thermal stability of chicken paste. Nanqi Zhao,Chaofan Guo,Ziyao Liu,Lin Chen,Yayun Hu,Minyi Han,Feng Huang,Zhuangli Kang,Xianchao Feng. 2024

[13]3D printing of pickering emulsion gels of protein particles prepared by high pressure homogenization and heating. Chao Wu,Zhe Liu,Xue Hei,Shanshan Li,Bo Jiao,Xiaojie Ma,Hui Hu,Jinjin Zhu,Bernard P. Binks,Zhiang Jia,Qingwen Chen,Qiang Wang,Aimin Shi. 2024

[14]Application of proteins in edible inks for 3D food printing: A review. Yifan Wang,David Julian McClements,Congjin Bai,Xingfeng Xu,Qingjie Sun,Bo Jiao,Song Miao,Qiang Wang,Lei Dai. 2024

[15]Development of soy protein isolate-chelator soluble pectin composite gels as extrusion-based 3D food printing inks: Effects of mingling strategy. Xie, Jin,Bi, Jinfeng,Liu, Xiaoxian,Blecker, Christophe,Jacquet, Nicolas,Lyu, Jian. 2025

[16]Development of soy protein emulsion gels-based 3D printed dysphagia foods: Effects of the egg white protein supplementation. Zhao, Peiyao,Kou, Delin,Qiu, Runkang,Li, Shugang,Awais, Muhammad,Tong, Litao,Wang, Lili,Fan, Bei,Wang, Fengzhong,Liu, Liya. 2024

[17]Emulsion gel-based inks for 3D printing of foods for dysphagia patients: High internal type emulsion gel-biopolymer systems. Yifan Wang,Rotimi Emmanuel Aluko,David Julian McClements,Yue Yu,Xingfeng Xu,Qingjie Sun,Qiang Wang,Bo Jiao,Lei Dai. 2024

[18]Effect of oil and particles content on microstructure, rheology, and thermosensitive 3D printability of particles -stabilized high internal phase Pickering emulsions. Wu, Chao,Liu, Zhe,Hei, Xue,Li, Shanshan,Jiao, Bo,Ma, Xiaojie,Hu, Hui,McClements, David Julian,Wang, Qiang,Shi, Aimin. 2024

[19]Effect of activator dosage and mass ratio of GGBFS to FA on 3D printing performance of kenaf geopolymer. Xiao Kong,Li Dai,Shicai Chen,Yuan Guo,Zehuan Zhang,Shaojie Wang. 2024

[20]Printed potentiometric sensors. Dean Song,Canwei Mao,Chenyu Jiang,Rongning Liang,Grzegorz Lisak. 2025

作者其他论文 更多>>