数字农科院2.0

Comparison of barrel-shaped fixed bed drying for different ventilation methods by mathematic simulation

文献类型： 外文期刊

作者： Jianchun Yan;Hai Wei;Zhaoyan You;Huichang Wu;Huanxiong Xie

作者机构：

关键词： Barrel-shaped bed;Drying;Fixed bed;Peanut;Simulation

期刊名称： Case Studies in Thermal Engineering

ISSN： 2214-157X

年卷期： 2022 年 38.0 卷

页码：

收录情况： SCIE（2022版） ; EI（2022版）

摘要： Unsteady one-dimensional partial differential equations for heat and mass transfer in peanut drying are used in mathematical simulations to compare the drying performance of a barrel-shaped bed in three ventilation modes: bottom up, inside out and outside in. Results obtained using the finite difference scheme show that the mathematical simulation reliably predicts the drying process of peanuts, and that the drying delay of bottom-up ventilation is the most significant at the beginning of drying. This is because the drying enhancement afforded by the high average velocity of air along the ventilation direction is insufficient to offset the drying delay caused by the large ventilation thickness compared with that afforded by the inside-out and outside-in ventilation. Furthermore, as the air volume flow increases, the time consumption and moisture content difference decrease, whereas the productivity, energy consumption, and uniformity increase for all three ventilation modes, consistent with the classical ventilation drying law. Under the same air volume flow, the time and energy consumptions for the bottom-up ventilation are the lowest, followed by those for the outside-in and inside-out ventilation. The productivity afforded by the bottom-up ventilation is the highest, followed by that by the outside-in and inside-out ventilation. The outside-in ventilation indicates the least moisture content difference and the best drying uniformity. Meanwhile, the inside-out ventilation indicates the most significant moisture content difference and the worst drying uniformity.

分类号：

  • 相关文献

[1]Optimizing the drying parameters of a fixed bed with reversing ventilation for peanut using computer simulation. Jianchun Yan,Huanxiong Xie,Hai Wei,Huichang Wu,Zhaoyan You. 2021

[2]果蔬变温压差膨化干燥技术. 毕金峰. 2007

[3]Drying kinetics and quality attributes of jujube (Zizyphus jujuba Miller) slices dried by hot-air and short- and medium-wave infrared radiation. Chen, Qinqin,Bi, Jinfeng,Wu, Xinye,Yi, Jianyong,Zhou, Linyan,Zhou, Yuhan.

[4]Degradation kinetics of total phenolic compounds, capsaicinoids and antioxidant activity in red pepper during hot air and infrared drying process. Zhou, Linyan,Cao, Zhenzhen,Bi, Jinfeng,Yi, Jianyong,Chen, Qinqin,Wu, Xinye,Zhou, Mo.

[5]Effects of Different Drying Method on Quality of Ulva Prolifera. Su, Dan. 2015

[6]Aroma dynamic characteristics during the drying process of green tea by gas phase electronic nose and gas chromatography-ion mobility spectrometry. Yang Y., Chen J., Jiang Y., Qian M.C., Deng Y., Xie J., Li J., Wang J., Dong C., Yuan H.. 2022

[7]Widely targeted metabolomics reveals the effect of different raw materials and drying methods on the quality of instant tea. Jin, Jian-Chang,Liang, Shuang,Qi, Shang-Xiong,Tang, Ping,Chen, Jian-Xin,Chen, Quan-Sheng,Chen, Yan-Feng,Yin, Jun-Feng,Xu, Yong-Quan. 2023

[8]Volatile profile characterization during the drying process of black tea by integrated volatolomics analysis. Lilei Wang,Jialing Xie,Yuliang Deng,Yongwen Jiang,Huarong Tong,Haibo Yuan,Yanqin Yang. 2023

[9]Characterization of N,O-heterocycles in green tea during the drying process and unraveling the formation mechanism. Yanqin Yang,Jialing Xie,Jiayu Chen,Yuliang Deng,Shuai Shen,Jinjie Hua,Jinjin Wang,Jiayi Zhu,Haibo Yuan,Yongwen Jiang. 2022

[10]Monitoring the dynamic change of catechins in black tea drying by using near-infrared spectroscopy and chemometrics. Li Li,Xufeng Sheng,Jiezhong Zan,Haibo Yuan,Xuyan Zong,Yongwen Jiang. 2023

[11]Exploring the effects of heat processing methods on the characteristic volatile flavour of walnut kernels based on multi-sensory analysis. Peng, Wu,Hui, Ouyang,Xu, Feiran,Li, Shugang,Zhou, Qi,Yu, Xiongwei,Jin, Long. 2022

[12]Effect of different drying methods on the amino acids, α-dicarbonyls and volatile compounds of rape bee pollen. Bi, Yanxiang,Ni, Jiabao,Xue, Xiaofeng,Zhou, Zidan,Tian, Wenli,Orsat, Valerie,Yan, Sha,Peng, Wenjun,Fang, Xiaoming. 2024

[13]Changes of 22 pesticide residues and 3 metabolites during the common processing of Auricularia auricula-judae. Mingqin Yang,Fayi Qin,Lijun Han,Chengkui Qiao,Ming Zhuang,Mengyuan Cao,Shiyu Wang,Rongli Pang,Linlin Guo. 2024

[14]Recent advances in the influences of drying technologies on physicochemical properties and biological activities of plant polysaccharides. Guo, Huan,Liu, Hong-Yan,Li, Hang,Wu, Ding-Tao,Zhong, Linda L. D.,Gan, Ren-You,Gao, Hong. 2023

[15]Effect of different drying temperature settings on the color characteristics of Tencha. Ya Lin Mao,Jie Qiong Wang,Fang Wang,Qing Qing Cao,Jun Feng Yin,Yong Quan Xu. 2024

[16]Effect of buckwheat inclusion fractions on the drying characteristics and quality attributes of instant noodle sheets. Wang, Youte,Wang, Yu,Yu, Xianlong,Wang, Kunhua,Lu, Yiwu,Xu, Huaide,Wang, Lili,Wang, Jun. 2025

[17]Effect of cultivar and process on the astringency of matcha based on flavonoids-targeted metabolomic analysis. Jinjin Xue,Panpan Liu,Yongquan Xu,Anhui Gui,Xueping Wang,Fei Ye,Lin Feng,Shengpeng Wang,Jing Teng,Shiwei Gao,Pengcheng Zheng. 2025

[18]Spectral Fingerprinting of Tencha Processing: Optimising the Detection of Total Free Amino Acid Content in Processing Lines by Hyperspectral Analysis. Qinghai He,Yihang Guo,Xiaoli Li,Yong He,Zhi Lin,Hui Zeng. 2024

[19]Maillard reaction inducing amino acids degradation can adjust the flavour characteristic of black tea. Li Li,Jiezhong Zan,Wenxue Chen,Xuyan Zong,Haibo Yuan,Yongwen Jiang,Hongkai Zhu. 2025

[20]High-humidity hot air impingement blanching (HHAIB): A novel strategy to reconcile drying efficiency and quality preservation in edible cricket processing. Jiaxin He,Xiaotong Fan,Lei Li,Shenyuan Quan,Shiye Luo,Jiabao Ni,Yanxiang Bi,Na Li,Ruge Cao,Xiaoming Fang. 2025

作者其他论文 更多>>