数字农科院2.0

Effect of oil and particles content on microstructure, rheology, and thermosensitive 3D printability of particles -stabilized high internal phase Pickering emulsions

文献类型： 外文期刊

作者： Wu, Chao;Liu, Zhe;Hei, Xue;Li, Shanshan;Jiao, Bo;Ma, Xiaojie;Hu, Hui;McClements, David Julian;Wang, Qiang;Shi, Aimin

作者机构：

关键词： High internal phase Pickering emulsion;3D printing;Thermosensitive 3D printing;Curcumin;Rheological properties

期刊名称： FOOD HYDROCOLLOIDS

ISSN： 0268-005X

年卷期： 2024 年 160 卷

页码：

收录情况： SCIE（2024版） ; ; EI（2024版）

摘要： In this study, soybean protein isolate (SPI) microgel/chitosan (CS) blending system prepared by gel fragmentation were used as particle-based emulsifiers. The presence of chitosan significantly reduced the particle size of the particles and decreased their contact angle (from 129 degrees to 102 degrees), thereby enhancing their wettability. These particles adsorbed onto the oil-water interface by rapidly decreasing the interfacial tension, forming stable O/Wtype high internal phase Pickering emulsions. Confocal laser scanning microscopy analysis showed that the droplets were tightly packed together, and some of them were observed to have a polyhedral shape due to the packing, which is the basis for the formation of self-supporting structures. The rheological properties are closely related to the 3D printing results, increasing the oil and particles concentration improves the viscosity, energy storage modulus and gel strength of the system, while the excellent thixotropy facilitates the ability to 3D print these emulsions. At an oil content of 75% and a particles concentration of 3.0%, the accuracy and stability of the printed models were 97.9% and 99.2%, respectively. Introduction of curcumin and NaHCO3 led to a color change from yellow to reddish-brown during heating, enabling thermosensitive 3D printing of color changing HIPPEs. This study may broaden the range of applications of plant-based HIPPEs in 3D and thermosensitive 3D printing, as well as for the development of other innovative food products.

分类号：

  • 相关文献

[1]Utilization of polysaccharide-based high internal phase emulsion for nutraceutical encapsulation and 3D printing: Reinforcement of curcumin stability and bioaccessibility. Xueqing Li,Liuping Fan,Jinwei Li. 2023

[2]3D printing of pickering emulsion gels of protein particles prepared by high pressure homogenization and heating. Chao Wu,Zhe Liu,Xue Hei,Shanshan Li,Bo Jiao,Xiaojie Ma,Hui Hu,Jinjin Zhu,Bernard P. Binks,Zhiang Jia,Qingwen Chen,Qiang Wang,Aimin Shi. 2024

[3]Whey Protein Isolate Nanofibers Prepared by Subcritical Water Stabilized High Internal Phase Pickering Emulsion to Deliver Curcumin. Xu, Xin,Zhang, Zhiyi,Zhu, Junlong,Wang, Dan,Liu, Guoyan,Liang, Li,Zhang, Jixian,Liu, Xiaofang,Li, Youdong,Ren, Jiaoyan,Deng, Qianchun,Wen, Chaoting. 2022

[4]Application Of Soy Protein Isolate A.nd Hydrocolloids Based Mixtures A s Promising Food Material In 3D Food Printing. Chen, JW, Mu, TH, Goffin, D, Blecker, C, Richard, G, Richel, A, Haubruge, E. 2019

[5]Effect of temperature on rheological, structural, and textural properties of soy protein isolate pastes for 3D food printing. Jingwang Chen,Hongnan Sun,Taihua Mu,Christophe Blecker,Aurore Richel,Gaëtan Richard,Nicolas Jacquet,Eric Haubruge,Dorothée Goffin. 2022

[6]Improvement of 3D printing performance of pea protein isolate Pickering emulsion gels by regulating electrostatic interaction between protein and polysaccharide. Wang, Yifan,Bai, Congjin,Mcclements, David Julian,Xu, Xingfeng,Sun, Qingjie,Jiao, Bo,Wang, Qiang,Dai, Lei. 2023

[7]Research Progress of Food-Grade High Internal Phase Pickering Emulsions and Their Application in 3D Printing. Wu, Chao,Liu, Zhe,Zhi, Lanyi,Jiao, Bo,Tian, Yanjie,Liu, Hongzhi,Hu, Hui,Ma, Xiaojie,Pignitter, Marc,Wang, Qiang,Shi, Aimin. 2022

[8]Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing. Hongxia Wang,Chaoyang Wu,Juncheng Zhu,Yang Cheng,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yu Fu,Hai Chen,Hongjie Dai,Yuhao Zhang. 2023

[9]Investigation of the mechanism of different 3D printing performance of starch and whole flour gels from tuber crops. Shengyang Ji,Qingxin Zeng,Minghao Xu,Ye Li,Tao Xu,Yongheng Zhong,Yuqi Liu,Fengzhong Wang,Baiyi Lu. 2023

[10]Effect of twin-screw extrusion pretreatment on starch structure, rheological properties and 3D printing accuracy of whole potato flour and its application in dysphagia diets. Yingsa Wang,Ruixuan Zhao,Wei Liu,Renjie Zhao,Qiannan Liu,Honghai Hu. 2024

[11]Encapsulation of lutein in gelatin type A/B-chitosan systems via tunable chains and bonds from tweens: Thermal stability, rheologic property and food 2D/3D printability. Hongxia Wang,Xianyou Lin,Juncheng Zhu,Yuxin Yang,Shihao Qiao,Bo Jiao,Liang Ma,Yuhao Zhang. 2023

[12]Effect of oil content and protein particles concentration on non-dairy whip topping based on Pickering emulsion system and their 3D printing properties. Chao Wu,Zhe Liu,Lanyi Zhi,Bo Jiao,Hui Hu,Xiaojie Ma,Jinjin Zhu,Marc Pignitter,Qiang Wang,Aimin Shi. 2023

[13]Correlation between 3D printability and rheological properties of biopolymer fluid: A case study of alginate-based hydrogels. Zhong Q.,Chen Y.,Zhang X.,Yang G.,Jin W.,Peng D.,Huang Q.. 2024

[14]Effects of different hydrocolloids on the 3D printing and thermal stability of chicken paste. Nanqi Zhao,Chaofan Guo,Ziyao Liu,Lin Chen,Yayun Hu,Minyi Han,Feng Huang,Zhuangli Kang,Xianchao Feng. 2024

[15]Application of proteins in edible inks for 3D food printing: A review. Yifan Wang,David Julian McClements,Congjin Bai,Xingfeng Xu,Qingjie Sun,Bo Jiao,Song Miao,Qiang Wang,Lei Dai. 2024

[16]Development of soy protein isolate-chelator soluble pectin composite gels as extrusion-based 3D food printing inks: Effects of mingling strategy. Xie, Jin,Bi, Jinfeng,Liu, Xiaoxian,Blecker, Christophe,Jacquet, Nicolas,Lyu, Jian. 2025

[17]Research Progress in 3D Printed Biobased and Biodegradable Polyester/Ceramic Composite Materials: Applications and Challenges in Bone Tissue Engineering. Zhu, Shunshun,Sun, Hongnan,Mu, Taihua,Richel, Aurore. 2025

[18]Development of soy protein emulsion gels-based 3D printed dysphagia foods: Effects of the egg white protein supplementation. Zhao, Peiyao,Kou, Delin,Qiu, Runkang,Li, Shugang,Awais, Muhammad,Tong, Litao,Wang, Lili,Fan, Bei,Wang, Fengzhong,Liu, Liya. 2024

[19]Emulsion gel-based inks for 3D printing of foods for dysphagia patients: High internal type emulsion gel-biopolymer systems. Yifan Wang,Rotimi Emmanuel Aluko,David Julian McClements,Yue Yu,Xingfeng Xu,Qingjie Sun,Qiang Wang,Bo Jiao,Lei Dai. 2024

[20]Effect of activator dosage and mass ratio of GGBFS to FA on 3D printing performance of kenaf geopolymer. Xiao Kong,Li Dai,Shicai Chen,Yuan Guo,Zehuan Zhang,Shaojie Wang. 2024

作者其他论文 更多>>