数字农科院2.0

Improving simulation accuracy of a drip irrigation tooth emitter: Simulation and verification of tooth tip fillet

文献类型： 外文期刊

作者： Xuefeng Qiu;Haitao Wang;Qiankun Leng;Suojun Xu;Jiandong Wang;Hongyi Yang;Xurong Mei

作者机构：

关键词： CFD;Emitter;Energy dissipation;Hydraulic characteristics;Simulation accuracy;Tooth tip fillet

期刊名称： Biosystems Engineering

ISSN： 1537-5110

年卷期： 2025 年 258 卷

页码：

收录情况： SCIE（2025版） ; ; EI（2025版）

摘要： Numerical simulations are a reliable and commonly used research method for optimizing the structure of toothed labyrinth channels. However, simulations often involve a physical model of the sharp angle (SA) that is inconsistent with the actual emitter, which distorts the results to a certain extent. This study investigated two tooth-tip filleting methods (constant and variable angles) with five radii (r0.02–r0.10 mm) and compared them with SA, analysing impacts on hydraulic characteristics. Results showed sharp angles widened flow channels by 22.77–22.85 % versus r0.10 mm fillets, reduced emitter flow rates by 23.66–27.94 % under each pressure gradients, and overestimated energy dissipation by 40.36–43.41 %. Internally, SA increased wake vortex areas at tooth tips, Q-criterion vortex intensity was overestimated by 27.75–45.04 %, while mean flow velocity, turbulent kinetic energy (TKE), and TKE dissipation rates were overestimated by 12.66–14.10 %, 18.84–20.59 %, and 20.52–22.42 %, respectively. TKE and dissipation rate zones were overestimated by 50.51–57.96 % and 37.55–47.84 %. Hence, when the SA physical model was used to optimise the structure of the toothed labyrinth channel, in addition to the deviation from the physical structure of the emitter, there were large deviations in the simulation calculations of the flow rate, energy dissipation, and internal hydraulic characteristics. However, the filleted-tooth tip, which was consistent with the machining accuracy of the emitter, further improved the simulation accuracy. The results provide important reference values for the optimal design of drip irrigation emitters and reducing their processing costs.

分类号：

  • 相关文献

[1]Experimental Investigation of Hydraulic Characteristics for Open Channel Gates. Wenzheng Zhang,Xiaomeng Jia,Yingying Wang. 2024

[2]The Influence of Non-Pressure Pipes Filled to Different Degrees on the Hydraulic Characteristics of Channel-Pipe Combined Irrigation Systems. Jia, Xiaomeng,Zhang, Wenzheng,Wang, Yingying,Shen, Yuqi,Sun, Yi. 2024

[3]利用CFD多相流模型优化设计沼气料液搅拌流场的方法研究. 黄如一,黄正昕,冉毅,熊霞,梅自力,王军,孔垂雪. 2019

[4]基于CFD和RSM的红茶萎凋机性能参数优化. 安霆,江用文,梁高震,胡斌,董春旺. 2019

[5]基于Fluent的联合收割机风筛选流场仿真分析. 江涛,吴崇友,伍德林. 2015

[6]江淮地区双层拱架塑料大棚通风效果CFD仿真与分析. 鲍恩财,汤庆,伍德林,吴崇友. 2014

[7]微灌用叠片过滤器全流场数值模拟与优化分析. 李浩,李红,黄修桥,韩启彪,张娟娟,孙浩,李文. 2016

[8]夏季肉牛舍湿帘风机纵向通风系统的环境CFD模拟. 陈昭辉,马一畅,刘睿,郭霏,刘继军,杨食堂. 2017

[9]吸盘式水稻育秧播种器吸孔气流场仿真分析. 张敏,吴崇友,张文毅. 2011

[10]利用CFD工具优化设计沼气工程流场形态的方法研究. 冯琳,郭亭,赵鑫,罗涛,梅自力,龙燕,黄如一. 2018

[11]不同倾角进料管的推流式反应器流体动力学(CFD)模拟. 张战锋,张衍林,马兰,赵红,袁怡. 2010

[12]基于CFD的植物工厂冠层微环境管道通风效果模拟. 方慧,伍纲,程瑞锋,仝宇欣. 2021

[13]Comparison and Optimization of Continuous Flow Reactors for Aerobic Granule Sludge Cultivation from the Perspective of Hydrodynamic Behavior. Xinye Jiang,Hongli Li,Qingyu Zhao,Peng Yang,Ming Zeng,Du Guo,Zhiqiang Fu,Linlin Hao,Nan Wu. 2022

[14]Investigation of distribution uniformity of distributor for biogas slurry application based on CFD analysis. Jingjing Fu,Yongsheng Chen,Binxing Xu,Biao Ma,Pengjun Wang,Aibing Wu,Mingjiang Chen. 2023

[15]Computational fluid dynamics analysis of the airflow field inside a cyclone of a combine harvester with adjustable blocks. Wan Xingyu,Yuan Jiacheng,Liao Qingxi,Wu Chongyou,Zhang Min,Guan Zhuohuai,Li Haitong. 2023

[16]Indoor Thermal Comfort Sector: A Review of Detection and Control Methods for Thermal Environment in Livestock Buildings. Cheng Q.,Wang H.,Xu X.,He T.,Chen Z.. 2024

[17]Research and Application on the Movable Subsurface Drip Irrigation System. Feng Junjie,Huang Xiuqiao,Zhai Guoliang,Deng Zhong,Di Guanghui,Liu Yang. 2012

[18]Elimination of Clogging of a Biogas Slurry Drip Irrigation System Using the Optimal Acid and Chlorine Addition Mode. Xuefeng Qiu,Jiandong Wang,Haitao Wang,Chuanjuan Wang,Yuechao Sun,Guangyong Li. 2022

[19]Vertical optimisation of tooth shape to improve the anti-clogging performance of emitters in drip irrigation systems. Xuefeng Qiu,Guangfeng Chen,Haitao Wang,Chuanjuan Wang,Jiandong Wang. 2023

[20]Assessment of RANS Models for Milli-Channel Turbulent Flow in Drip Irrigation Emitter. Qi Feng,Qingzheng Li,Yaojun Li,Xuefeng Qiu,Jiandong Wang,Xingfa Huang. 2025

作者其他论文 更多>>