Research and analysis of conveyor separation mechanism of light and simple sweet potato combine harvester based on EDEM discrete element method
文献类型: 外文期刊
作者: Peng, Jiwen;Shen, Haiyang;Ding, Wenqin;Chen, Wenming;Peng, Baoliang;Li, Xueqiang;Hu, Lianglong;Wang, Gongpu
作者机构:
关键词: EDEM discrete element method;Conveying and separating mechanism;Simulation analysis;Parameter optimization;Field test
期刊名称: COMPUTATIONAL PARTICLE MECHANICS
ISSN: 2196-4378
年卷期: 2025 年
页码:
收录情况: SCIE(2025版)
摘要: During the mechanized harvesting process, fresh sweet potatoes are prone to damage, which affects their marketability; meanwhile, incomplete separation of potato tubers from the soil also reduces harvesting efficiency. This study employs the EDEM discrete element method to model and simulate the conveying and separation mechanism of the 4UZ-80 lightweight fresh sweet potato combine harvester, investigating the effects of key parameters on damage rate, skin breakage rate, and soil content. Simplified models of the mechanism, sweet potato particles, and soil particles were created using Inventor software, and the interactions among sweet potatoes, soil, and conveying chain rods during transport were simulated on the EDEM platform. The research focuses on the influences of conveying speed, conveying angle, and material generation speed on the forces acting on sweet potatoes and the efficiency of soil separation. Simulation results indicate that when the primary lifting chain operates at 0.45 m/s, with a conveying angle of 30 degrees and generation speeds of 500 g/s for sweet potatoes and 2000 g/s for soil, the compressive force on the sweet potato particles is relatively low, while the soil proportion decreases from 77.92% at 0.2 m/s to 69.81% at 0.45 m/s, and further to 64.50% at 0.7 m/s. Moreover, increasing the conveying angle from 25 to 35 degrees reduces the soil content from 75.49 to 64.38%, suggesting that a larger angle improves soil separation, although it increases the forces on sweet potatoes at the junction. Adjustments in material generation speed reveal that too low a speed leads to direct collisions on the sweet potatoes, whereas too high a speed exacerbates forces due to soil accumulation; both conditions significantly affect the separation outcome. Under the conditions of conveying speed of 0.45 m/s, conveying angle of 30 degrees, and working speed of 0.25 m/s, the rate of sweet potato injury is about 0.84%, the rate of peeling is about 0.74%, and the soil content is 70.94%, which is consistent with the simulation results. These findings demonstrate that the EDEM discrete element method offers high predictive accuracy for optimizing the parameters of the conveying and separation mechanism, providing effective theoretical and technical support for reducing sweet potato damage and improving separation efficiency.
分类号:
- 相关文献
作者其他论文 更多>>
-
Design and study of anti-blocking type potato stubble disc clamping and pulling device based on MBD-DEM coupled simulation
作者:Wang, Yewei;Wei, Zhongcai;Su, Guoliang;Zhang, Xiangcai;Wang, Xianliang;Cheng, Xiupei;Wang, Faming;Li, Xueqiang;Zhou, Hua;Yang, Zhenyu;Jin, Chengqian
关键词:Agricultural machinery;Potato stubble;MBD-DEM coupled simulation;Flexible clamping and pulling;Seedling separation
-
Multi-layer skid controller design of distributed electric drive mobile platform based on the optimal slip rate to improve its driving stability
作者:Chen, Feng;Ding, Junjie;Chen, Long;Zheng, Enlai;Luo, Zhitao;Lu, Yingtao;Shi, Yinyan;Wang, Xiaochan;Hu, Lianglong;Zhao, Shanhu
关键词:Protected horticulture;EDMP;System model;Tire-road friction;Skid control
-
Experimental research on shear mechanical properties of tomato stem**
作者:Gao, Qimin;Cheng, Lei;Shen, Haiyang;Chen, Yongchun;Zhao, Weisong;Wang, Zhenwei;Chen, Mingjiang
关键词:tomato stem;maximum shear force;straight knife
-
Research on regional dual carbon targets and path planning based on mathematical modeling methods: a case study of southeast coastal China
作者:Shen, Haiyang;Guo, Kai;Liao, Xuan;Gao, Qimin;Wu, Feng;Gu, Fengwei;Hu, Zhichao
关键词:Logistic population growth model;Gray prediction model GM(1,1);Multiple nonlinear regression;Extended STIRPAT model;Scenario design;& quot;Dual carbon & quot;(carbon peak and carbon neutrality)
-
Experiment and Study of Garlic Root Cutting Based on Continuous Force Feedback
作者:Yang, Ke;Yu, Zhaoyang;Luo, Weiwen;Fan, Jiali;Li, Yuyao;Gu, Fengwei;Zhang, Yanhua;Wang, Shenying;Peng, Baoliang;Hu, Zhichao
关键词:pressure sensors;pressure graphs;round blade;cutting root;garlic;test bench
-
Design and Optimization of a Toothed-Plate Single-Roller Crushing Device for Waste Plastic Film
作者:Guo, Kai;Yang, Hongguang;Cao, Mingzhu;Shen, Haiyang;Chen, Xulei;Gu, Fengwei;Wu, Feng;Hu, Zhichao
关键词:waste plastic film;crushing;size qualification rate;impurity content
-
Design and Key Parameter Optimization of Conic Roller Shelling Device Based on Walnut Moisture-Regulating Treatments
作者:Wang, Jiannan;Liu, Minji;Wu, Huichang;Peng, Jinyi;Peng, Baoliang;Yang, Yanshan;Cao, Minzhu;Wei, Hai;Xie, Huanxiong
关键词:agricultural machinery;walnut shelling;optimization